BuildCompass evaluates plan sets against code-based compliance checks. Coverage varies by code edition and jurisdiction. Explore our supported codes and standards below.
International Code Council (ICC) model codes adopted as the basis for most U.S. building codes.
International Code Council (ICC)
The primary model building code for commercial and residential construction in the United States. Covers occupancy classification, construction types, means of egress, fire protection, and general building requirements.
International Code Council (ICC)
Model plumbing code covering fixture counts, restroom requirements, and water distribution. Ensures adequate plumbing facilities based on occupancy and occupant load.
International Code Council (ICC)
Mechanical system requirements including HVAC, ventilation, exhaust systems, and equipment clearances.
International Code Council (ICC)
Energy efficiency requirements for building envelope, mechanical systems, lighting, and power. Climate zone-specific requirements.
National Fire Protection Association (NFPA)
Electrical installation requirements including working clearances, panel sizing, and circuit protection. Published by NFPA.
Federal standards and industry codes referenced by building codes.
U.S. Department of Justice
Federal accessibility standards under the Americans with Disabilities Act. Covers accessible routes, doors, restrooms, parking, signage, and accommodations for people with disabilities.
State and local code amendments with jurisdiction-specific requirements.
NYC Department of Buildings
New York City amendments to the IBC with stricter requirements for high-density urban construction. Includes unique exit, elevator, and fire protection requirements.
California Building Standards Commission
California Building Standards Code with state amendments. Part 2 (Building), Part 6 (Energy), Part 11 (CALGreen). Enhanced seismic and accessibility requirements.
Florida Building Commission
Florida Building Code based on IBC with amendments for hurricane resistance, high-velocity hurricane zones (HVHZ), and flood protection.
BuildCompass is a pre-submission screening tool. All compliance determinations must be verified by the Authority Having Jurisdiction (AHJ). Local amendments, interpretations, and site-specific conditions may affect code applicability.
When a rule returns "Unknown," it means BuildCompass couldn't find sufficient evidence in your documents to make a determination. This is not a code violation—it indicates missing or unclear information in the plan set. Review the rule's evidence requirements to improve your document coverage.
BuildCompass focuses on requirements that can be verified from plan documents. Some code provisions require:
These items are flagged as limitations for each code family where applicable.
Missing a code or rule? Let us know